Reliability Testing

Analyzing responses to varied environmental conditions

DEKRA Reliability Department was integrated System Reliability, PCB (Print circuit board) and LED (light-emitting diode) to offer verification services. Based on our professional knowledge and experiences over 20 years, DEKRA not only has offered completely reliability tests and verification services from LED component, PCB, PCBA to Module and System Level, but also most comprehensively professional laboratory in Asia Pacific.

Failure accompanied with poor quality of product after Reliability test or other validation, and Failure Analytic Technology implementation can find out the design weakness and improve the reliability. Therefore, DEKRA is not only the Reliability service platform but also offers, DOE Design for process improvement, Failure Analysis and reliability validation in electrical component, module and system products.

DEKRA has established volume verification facilities in order to provide customers the fastest and best quality services, meanwhile DEKRA was accredited laboratory by ISO / IEC17025, TAF17025, CNAS17025, A2LA 17025, US EPA LM-80, and authorized third-party Laboratory of international branding companies, such as Lenovo, DELPHI, DELL, Cisco, hp and etc.

Climatic Environmental Test

  • Temperature and Humidity Testing
  • Dry Heat Test
  • Low Temperature Test
  • Thermal Cycling / Shock Test
  • Temperature and High Altitude (Low Air Pressure) Test
  • Salt Spray Test
  • Fibrous Dust Tes

Dynamic Environmental Test

  • Tumble Test
  • Vibration Test
  • Mechanical Shock Test
  • Bump Test
  • Loose Cargo-Bounce Test
  • Drop Test
  • Earthquake Test
  • Package Compression Test

Outdoor Environmental Test

  • Wind Speed Test
  • Gas Corrosion Test
  • Solar/UV Radiation Test
  • Sand/ Dust/ Rain/ Water Immersion Test

Contact us

Share page